Each client has their own unique set of requirements that we meet every time. At So-Cal Shade Sails, we take these needs very seriously. Our shade sails can protect your valuables and those you care from direct sunlight, the average shade rating of our fabric canopies is approx. 90% and the UVR block is approx. 95%.

At So-Cal Shade Sails, we realize that it is important to maintain the beauty of your home, our custom made shade sails can enhance the look of your property. We take into account the design of the structure, and creatively design your shade sails to meet your needs. Our goal is to provide our clients with sun shades that are both functional as well as beautiful.

Made with polyethylene fabric that allows hot air to “breathe” up and out, the Shade Sail designs are structured in an attractive taut manner. Usually shaped as a square or rectangle, we can design them to fit any space or any shape of your choice. Also, you are invited to choose the right color to further accent the area that will be covered. There is no limit to the design of a Shade Sail, it can be used commercially or in your residence.

Our shade sails are manufactured with a stainless steel cable, double locked stitched into its perimeter. This cable terminates at a stainless steel ring located at each corner. These rings are then used to fasten the shade sail to a hard point either on a post or existing structure. Each corner is further reinforced with extra layers of cloth and strapping to distribute forces.

All stitching is performed using a locking stitch; outdoor "awning maker" thread is used throughout. The size of the stainless cable and rings as well as attachment hardware are engineered to be the appropriate size for each installation.

Shade Sails can be attached to existing structures with a variety of common or custom made brackets and hardware. They can also be supported by their own columns made of either timber or steel pipe.

We prefer to use Schedule 40 Galvanized Steel Pipe embedded in concrete footings. The dimensions of the pipe and the footings are engineered for each shade sail and its application depending on the size of the sails and the expected wind pressure.

Shade Sails are an alternative to basic sun umbrellas, boring gazebos, or simple awnings, our Custom Shade Sails will give you the desired protection while adding a modern design to your property.

Contact us today and and get your FREE QUOTE!

Shade Sails are made to fit very accurately to their attachment points. Therefore it is important to follow these instructions:

1. Plan your installation. Check with your local building Dept. Many installations require a building permit. We are not responsible for obtaining permits or for engineering your installation.
2. To Help you visualize the Sails, you can use string stretched between your planned attachment points. Remember the sail do not have straight lines at the edges, they are constructed with a gentle curve that deflects about 10% over the length of each edge. We have found the best looking installations have bold changes in height from one corner to the next, and that overlapping sails or multiple sails give a more interesting look.
3. The attachment points should be installed first. Then the sails are made to fit. Therefore, install your posts with eye bolts, plates, eyes or straps to the house, tree or whatever you have chosen to support them. Remember, there can be substantial wind loads. (from 5.5 to 15 lbs. per square foot of sail). The sails have stainless wire around their perimeters and can handle high wind loading. These loads are divided between the corners, but it is important that where they attach to be adequate.
   For our posts, we usually start with 4" schedule 40 steel pipe (galvanized) or temporary power poles (treated) that are 6" or larger for our posts. They are usually embedded in a concrete footing, 3 ft. to 6 ft. deep and 1 ft. to 1.5 ft. in diameter. As the sails get larger or higher then the post size should be larger. Corners of buildings are excellent attachment points and we have designed a special corner clip for that application (see order form). Also, it is often possible to connect to remote structures with wire spanning the distance.
4. The sails have a stainless steel ring at each corner that must be attached to your attachment point. This can be done in a variety of ways; the best method for the "do it yourselfer" is to rope them on with a length of low stretch Dacron rope. This gives a lot of adjustability and is very strong and inexpensive. For a more high tech look you can use stainless steel "D" shackles and turnbuckles.
5. Measure accurately from the outer edge of the eye of one attachment point to the next. On four sided sails we need diagonal measurements as well. Also, indicate the highest corner (if there is one) with an H.
6. The hems can be on top (up) or on the bottom (down). Indicate your preference (usually down).
7. Choose a color. All our fabrics have an ASTM Class 1 fire rating. (See all Shade Sails Colors) Other fire ratings such as NFPA and California Fire Marshal ratings are available in limited colors and at an increased price.
8. To calculate the cost of the sail, add the perimeter dimensions together and divide the total inches by 12.

   Commercial Customs = ($25.00 per linear foot). Then add $50 for each corner.
   (Prices subject to change without notice. Please call us first.)
   (Sails with perimeters larger than 85' add 10%)

   "Ready Made Construction Customs" = ($22.00 per linear foot). Then add $45 for each corner.
   (Prices subject to change without notice)
   (The "Ready Made" constructed custom must be limited to 325 square feet)

9. You will need various hardware to attach the sails, since we compensate the measurements to include the size of the hardware, it is essential to use our marine grade stainless hardware as we are familiar with their sizes and the parts are all compatible. In any case, we need to know how you intend to attach the sails so that we can adjust the dimensions accordingly. If you do not use our hardware then we will not guarantee the fit. See all shade sails hardware.

Custom Shade Sails take about a month to complete.